12.3.2. Removal, dismantling, assembly and installation of a rack of a suspension bracket


  1. Poddomkratte the car also remove the corresponding wheel.
  1. Turn out the lower bolts of an arm of a rack and slightly give the top bolts.
  1. Turn out the lower bolt of fastening of a rack (3) and remove it.
  1. Holding the shock-absorber from a provorachivaniye, slightly give a nut (5) of fastening of a spring.

Reuse of this nut is not admissible.

  1. Squeeze out an arm (6) of a spring down to unload the shock-absorber and finally give a nut, a washer and the rubber plug. If necessary use the device for compression of a spring.
  2. Remove the shock-absorber, a spring and a pro-rate of a spring.
  3. Assembly and installation are made upside-down. Tighten fixture with the required efforts.