11. Brake system
|
See also Specifications to the Head Nastroyki and routine maintenance of the car. |
General information
Brake system | Brake system. With double diagonal division of contours, disk brake mechanisms and one-piston floating supports * |
Volume and type of brake fluid | see Specifications to the Head Nastroyki and routine maintenance of the car |
Hydraulic ABS block | Bosch ABS 5.4 (TC/ABS 5.3), with 8 Ý/m ABS valves (and 4 Ý/m TCS valves) |
Hydraulic ESP block | Bosch ESP with 8 Ý/m ABS and 4 valves Ý/m ESP valves |
Maximum pressure of the returnable pump of the hydraulic ABS block, atm | 250 |
Resistance of lobbies//back wheel sensors, Ohms | 1600 ± 160//1130 ± 115 |
Quantity of teeths of rotors of wheel sensors | 29 |
Gap between the forward wheel sensor and its rotor, mm | 0.3 ÷ 1.3 |
Vacuum pump | Magneti Marelli |
The maximum discharge created by the vacuum pump, atm | 0.95 |
Strengthening developed when pressing a brake pedal with effort of 300 N | 5:01 |
* On models till 1999 issues were applied motionless two-piston supports
Brake mechanisms of forward wheels
Brake disks | Ventilated |
Diameter of brake disks, mm | 285 |
Thickness of brake disks, mm | |
|
25 |
|
22 |
The maximum admissible beating of the established disk, mm | 0.08 |
Maximum admissible difference of thickness of a brake disk, mm | 0.015 |
Thickness of brake slips, mm | |
|
11 |
|
5 |
|
3 |
Brake mechanisms of back wheels and parking brake
Brake disks | Not ventilated |
Type | Disk, ventilated |
Diameter of brake disks, mm | 278 |
Thickness of brake disks, mm | |
|
10 |
|
8 |
The maximum admissible beating of the established disk, mm | 0.08 |
Maximum admissible difference of thickness of a brake disk, mm | 0.008 |
Admissible ovality of the built-in drum of a brake disk, mm | 0.08 |
Internal diameter of the built-in drum of a brake disk, mm | 160 |
Thickness of brake overlays of a working brake, mm | |
|
11 |
|
4 |
Thickness of brake overlays of the parking brake, mm | |
|
3 |
|
0.5 |
Efforts of tightening of threaded connections, N • m
The directing fingers of floating supports | 28 |
Wheel bolts | 110 |
Bolts of fastening of brake disks | |
|
4 |
|
10 |
Bolts of fastening of an anchor bracket | |
|
|
|
117 |
|
140 then to hold on the 45th hail on a corner. |
|
80 |
Bolts of fastening of a motionless support to stupichny assembly | 80 |
Connections of brake tubes | 45 |
Connections of brake hoses | 15 |
Bolt of the hinge of a steering column | 25 |
Union of lubricant of the mechanical vacuum pump | 24 |
Bolts of fastening of the mechanical vacuum pump | |
|
24 |
|
17 |
Brake lines to GTTs | 16 |
GTTs fixture | 25 |
Tubes to the block of auxiliary systems | 16 |
Arm of a cable of the parking brake | 8 |
Nuts of fastening of back stupichny assembly | 50 then to hold on the 30th hail on a corner. |
Fixture of the hydraulic block | 20 |
Bolt of fastening of the holder of a tube of GUR | 5.4 |