bcee4405

3.1. General information

Extreme thickness of wear of brake shoes, mm
5

Types and volumes of the applied lubricants and liquids

Fuel type
  • Petrol engines
Unleaded gasoline from AI-91 to AI-98
  • Diesel engines
Diesel fuel
The recommended fuel type for petrol models
  • B205E, B235E
AI 95
  • B205R, B308E
AI 98
Volume of the fuel tank, l
  • B205E, D308L
75
  • B235E/R, B308E
70
Type of motive oil
Saab Turbo, or meeting requirements of API-SG/SH and ACEA A2-96/A3-96 including the requirement of CCMC G4/G5.
Viscosity of motive oil according to the SAE specification
  • All-weather
10W-30, 10W-40 or 15W-40
  • At continuous operation at temperatures below-20 a hail
5W-30 or 5W-40
  • At continuous operation at temperatures the 15th hail is higher
15W-30 or 20W-50
The volume of motive oil (with the filter), l
  • B205E, B235E
    • When replacing
4.0
    • With the oil cooler
5.4
  • B308E
    • When replacing
4.5
    • With the oil cooler
5.0
  • D308L
    • When replacing
6.8
    • Without filter
6.1
For increase in level from lower to the top tag on the probe
1.0
Type of the RKPP gearbox oil.
Synthetic oil for RKPP Saab (No. 400 108 247)
Volume (Sukhoi) of the RKPP gearbox oil, l
1.9
Type of gearbox oil for AT
  •  AF33-5 (ATF)
Saab 3309 or Dexron III
  • AF30
Texaco Texamaic Dexron III
Volume of ATF, l
  • For increase in level from lower to the top tag on the probe
0.5
  • Full (with the hydrotransformer and the oil cooler)
7.2
  • When replacing
3.2
Type of cooling liquid 
Original OZh Saab of 50% of water
Volume of cooling liquid, l
  • 4-cylinder engines
7.4
  • Petrol V6 engines
7.2
  • Diesel V6 engines
8.1
Type of brake fluid
DOT 4
Volume of brake fluid, l
  • In the tank
0.225
  • Full volume
0.9
GUR liquid type
CHF 11S (No. 30 32 380 according to the Saab catalog)
Full volume of GUR liquid, l
1.3
Type of lubricant of CV JOINTS
  • Internal
Mobile Grease K575GS (No. 30 04 561)
  • External
Molycote VN 2461C (No. 87 81 676)
Lubricant for drafts of levers of screen wipers
Gleitmo 805 (white jellied lubricant, No. 30 06 442) or Gleitmo 880 (spray, No. 30 06 582)
Lubricant for hinges of levers of screen wipers
Gleitmo 582 (white fat) or Gleitmo 540 (No. 30 08 612)
Lubricant for the lock of a cowl, pins and a safety hook
Gleitmo 805
Lubricant for the trunk lid lock mechanism
The liquid getting oil
Lubricant for a finger of the coupling device
Molycote 33 (No. 30 20 476)
Lubricant for levers of limiters of doors
Gleitmo 880
Lubricant for a carving of spark plugs
Molycote 1000 or analog
Lubricant for rubber consolidations of the module of ignition
Krytox
Lubricant for battery plugs.
Acid-free vaseline (No. 30 06 665)
Spray for cleaning of contacts of sockets of an electrical wiring
Kontakt 61

Engine

Type of spark plugs//interelectrode gap, mm
  • B205E, B235E
NGK BCPR 6ES-11//1.0 ÷ 1.1
  • B205E with special equipment (M01-)
NGK PFR 6H-10//0.9 ÷ 1.0
  • B235R (225 h.p.)
NGK PFR 7H-10//0.9 ÷ 1.0
  • B235R (230 h.p.).
NGK PFR 6H-10//0.9 ÷ 1.0
  • B308E 
 NGK BKR 7ES-11//1.0 ÷ 1.1
The effort developed by a natyazhitel of a belt of the drive of auxiliary units, N  not less than 170

Tires

Types and speeds (km/h) of operation of the used tires
  • 205/65 R15V
to 160
  • 215/55 R16V
to 190
  • 225/45 R17Y
to 190
  • Spare wheel of T115/70 R16
to 80
  • Spare wheel 195/65 R15
to 80
Pressure of a rating of tires (when loading from 1 to 3 persons), atm
  • Except spare wheels
2.2
  • Spare wheel of T115/70 R16
4.2
  • Spare wheel 195/65 R15
2.5

Efforts of tightening of threaded connections, N • m

Bolts of fastening of wheels
110
Drain stopper of motive oil.
25
Top bolts of fastening of racks of a forward suspension bracket
18
Bolts of fastening of a back stretcher to a body
90 then to hold on the 60th hail on a corner
Bolts of fastening of longitudinal levers of a back suspension bracket to a body.
90 then to hold on the 30th hail on a corner
Spark plugs
  • B205E, B235E/R
28
  • B308E 
27.1

Fastening of a final hose of AT

27.1

General information

This chapter was formed with the purpose to help the owner of the car to support the vehicle in a condition of the maximum readiness for operation, receiving from it effective return with observance of requirements to profitability and safety.

The schedule of routine maintenance of the car is provided in the Section Schedule of Routine Maintenance. Below the sections devoted to a detailed statement of an order of performance of each of procedures of service separately are offered attention of the reader. Material included descriptions of visual checks, adjustments, procedures of removal and installation of components, and also various useful tips and recommendations.

The components of a compartment of 4-cylinder engines which are subject to regular service

1 — the Cover of a jellied mouth of motive oil with the built-in probe
2 — the Tank of brake fluid
3 — the Assembly block of the relay and safety locks
4 — the Broad tank of the cooling system
5 — the Tank of liquid of windscreen washers

6 — the Rechargeable battery
7 — the Probe of measurement of the ATF level
8 — the Turbocompressor
9 — Assembly of coils of ignition
10 — the GUR liquid Tank

The components of a compartment of the petrol V6 engine which are subject to regular service

1 — the Probe of measurement of level of motive oil
2 — the Cover of a jellied mouth of motive oil
3 — the Tank of brake fluid
4 — the Assembly block of the relay and safety locks
5 — the Broad tank of the cooling system

6 — the Tank of liquid of windscreen washers
7 — the Rechargeable battery
8 — the Probe of measurement of the ATF level
9 — Assembly of coils of ignition
10 — the GUR liquid Tank

The components of a compartment of the diesel engine which are subject to regular service

1 — To a ryshka of a jellied mouth of motive oil
2 — the Tank of brake fluid
3 — the Assembly block of the relay and safety locks
4 — the Broad tank of the cooling system

5 — the Tank of liquid of windscreen washers
6 — the Rechargeable battery
7 — the Probe of measurement of level of motive oil
8 — the GUR liquid Tank

Serving the car according to the stipulated kilometrazhno-time schedule, and following the detailed recommendations provided below, the reader will receive the accurate action program which implementation will provide long duration and reliability of service of its vehicle. Remember that this program is made on a complex basis and implementation only of its separate points with neglect others will not result in desirable result.

Do not forget as well that at severe conditions of operation as, for example, at primary operation of the car in a city cycle, frequent movements in the mountain area, towage of the trailer or the movement in the conditions of the increased dust content maintenance should be carried out more often.

In the course of service of the car the reader will be convinced that many procedures can, and have to be united in the general groups in view of similarity of the nature or proximity of an arrangement of knots. For example, if the car for any reason is lifted above the ground, it is necessary to take an opportunity and at the same time to check a condition of components of system of production of the fulfilled gases, a suspension bracket and steering. Also, having hired a dynamometer key, check effort of tightening of all available carving fixture. Making rotation of wheels, at the same time estimate a condition of brake mechanisms and wheel bearings.

The first step of service of the vehicle is always self-training of the performer. Attentively get acquainted with material of the present chapter, then make the list of the components needing attention, prepare the necessary tool and outline the short plan of the forthcoming works. In case of emergence resistant to solution of problems ask for the help specialists of car service.