bcee4405

7.3.7. Removal and installation of a starter

4-cylinder engines

 PERFORMANCE ORDER

  1. Disconnect a negative wire from the rechargeable battery and remove the top casing of the inlet pipeline.
  1. Turn out the top bolt of a starter (3 on an illustration) and disconnect from it an electrical wiring (4).
  1. Poddomkratte the car also cut a bandage tape (6) traction relays. Turn out the lower nut (7) and remove a starter.
  2. Installation is made upside-down.

Petrol V6 engines

 PERFORMANCE ORDER

  1. Remove the generator (see the Section Removal and installation of the generator) and disconnect an electrical wiring from a starter (3 on an illustration).
  1. Turn out the top bolt of fastening of a starter (4).

It is the most convenient to make it through the right wheel arch by means of the key extender.

  1. Turn out the lower bolt (5) and remove a starter (6).
  2. Installation is made upside-down.

Diesel engine

 PERFORMANCE ORDER

  1. Remove the lower support of the engine (see the Head Dvigatel).
  1. Disconnect a generator electrical wiring (2 on an illustration) and a starter (3).
  1. Give fixture (4) starters and, having removed the engine from a stretcher by means of the wedge established between them remove a starter.
  2. Installation is made upside-down.