bcee4405

10.2.2. Removal and installation of a pedal of coupling and its arm

Before starting removal of a pedal of coupling establish seats in their extreme back situation.


 PERFORMANCE ORDER

  1. Remove components.

Ensuring access to the main cylinder of coupling

1 — the Rechargeable battery
2 — the Assembly block of the relay and safety locks
3 — the Block of fusible inserts and the switch of anticreeping system
4 — the Arm of the assembly block
  1. From a motive compartment turn out 4 nuts of fastening of the main cylinder of coupling and an arm of a pedal of coupling.
  1. Remove the dashboard entirely (see the Head Kuzov).
  1. Remove a knee emphasis under a steering wheel.
  1. Separate the D/V socket of a pedal of coupling (9) and turn out bolts (10) of fastening of an arm of a pedal to an intensifying beam.
  1. Unhook a spring (11) from a pedal, remove a clamp (12) and take an axis.
  1. Disconnect a steering shaft from the steering mechanism (13).

Dismantling of the shlitsevy hinge of a steering shaft is not allowed.

  1. Give fixture (1) of an intensifying beam and delay it back so that it was possible to remove a pedal arm. Remove an arm.
  2. Installation is made upside-down.