bcee4405

4.5.7. Replacement of the perepuskny valve of the lubrication system of the engine

 PERFORMANCE ORDER

  1. Poddomkratte the car also lower motive oil.
  1. Uncover (2 on an illustration) the perepuskny valve.
  1. Cut M10 carving in a face plate, screw in it a bolt and extend the valve (1 on an illustration).

Metal shavings should not get inside.

  1. Oil the valve and install it into place.
  2. Establish a valve cover with new consolidation.
  3. Lower the car on the earth and fill the engine with oil.
  4. Start the engine and make sure of lack of leak of oil.