bcee4405

9.10. Replacement and adjustment of the sensor of position of the selector of the AT modes

Replacement

 PERFORMANCE ORDER

  1. Remove the rechargeable battery together with its pallet.
  1. Clear area around a joint of a jellied tube of ATF with AT and pick up the phone (4).
  1. Install the lever in situation "L", give a nut (5) and remove the lever (6).
  2. Turn out bolts (7) of fastening of the sensor of position of the selector of the AT modes, a razkontrita and give a nut (8) of fastening of the sensor.
  3. Separate the socket of the sensor and remove it from a shaft.
  4. Installation is made upside-down.

At first tighten bolts, and then a sensor nut.

Adjustment

 PERFORMANCE ORDER

  1. Adjustment will require special adaptation.
  2. Establish AT in the N mode, give bolts of fastening of the sensor and place on it special adaptation.
  1. Move the sensor to situation in which the tag on it would coincide with a cut on adaptation.