- Remove assembly of the lever of the selector and its casing (see the Section Removal and installation of assembly of the lever of the selector of the AT modes and its casing) and transfer the lever to situation "D" or "N".
|
|
- Turn out the screw (2) and remove forward section (3) finishings of the lever then squeeze out the button (4) inclusions of the AT sports mode up and unsolder it.
|
- Take a clamp in a middle part of the lever and remove the button of removal of fixing together with a back part of finishing of the lever.
|
|
The electrical wiring remains in finishing. |
|
|
- Cut a coupler (3) electrical wirings of illumination and a coupler (4) electrical wirings of an electromagnet of blocking then separate the socket (5) of an electrical wiring of an electromagnet.
|
|
|
- In need of replacement of an electromagnet of blocking of the selector turn out screws (5) of its fastening, take the lever (6) from its top part and remove an electromagnet.
|
- Turn out screws (6) and remove the indicator of the chosen AT mode. Drill rivets (7).
|
|
- Turn out a bolt of fastening of the lever of the selector and remove the lever together with the holder from a basic plate.
|
- Remove a lock washer, beat out the plug and separate the selector lever from his holder.
- Installation is made upside-down, use a new lock washer.
|
|
