- The car also establish to Poddomkratta it on props.
|
|
- Remove a support (2) and a wire of weight (3) then give bolts (4) fastenings of an arm from an arm and remove it. Disconnect hoses of the oil cooler (5).
|
|
|
Prepare for collecting the oil following from hoses. After removal of hoses to their zakuporta. |
|
|
- Turn out bolts (6) of fastening of a cover of valvate assembly and uncover (7), having brought down her the hammer with rubber brisk.
|
- Separate the socket of the valve of switching (2) replaced Ý/m, turn out a bolt of its fastening (3), and remove the valve.
|
|
Removal Ý/m valves of switching of AT AF33-5. |
|
|
Removal Ý/m valves of switching of AT AF30. |
- At removal of valvate assembly separate sockets (2) of all Ý/m valves, and also ATF temperature sensor. Turn out bolts (3) fastenings of valvate assembly.
|
|
Sockets Ý/m valves and sensor of temperature of ATF, bolts of fastening of valvate assembly (AF33-5). |
|
|
Sockets Ý/m valves and sensor of temperature of ATF, bolts of fastening of valvate assembly (AF30). |
|
|
Bolts of fastening of valvate assembly have different length. |
- Accurately disconnect the valve (4) of manual control from the lever of the selector and remove valvate assembly.
|
|
Do not lose two sealing rings of valvate assembly. |
- Installation is made upside-down.
|
|
Before installation of a cover clear it and remove from it the remains sealing materials then apply a strip of sealant 1 mm thick on its interfaced surfaces. Process a carving of bolts of fastening of a cover the fixing sealant. |
- In conclusion of installation check the ATF level and if necessary modify it (see the Head Nastroyki and routine maintenance of the car).
|
|
