Saab:: 9-5: Removal and installation of the step engine of the gate of mixing of air and э / air circulation mode gate motor

1. Introduction
2. Governing bodies and methods of operation
3. Settings and routine maintenance of the car
4. Engine
5. Cooling systems of the engine, heating, ventilation and air conditioning
- 5.1. Engine cooling system
- 5.2. Systems of heating, ventilation and air conditioning
  - 5.2.1. General information
  - 5.2.2. Removal and installation of the control unit of system of ventilation with a heater and To/in, removal and installation of the broad valve
  - 5.2.3. Replacement of the valve of a cut-off of cooling liquid and it Ý/m valve
  - 5.2.4. Removal and installation of the fan of a heater
  - 5.2.5. Removal and installation of the heat exchanger
  - 5.2.6. Removal, repair and installation of the K/V compressor
  - 5.2.7. Removal and installation of the sensor of temperature in salon
  - 5.2.8. Removal and installation of the step engine of the gate of mixing of air and э / air circulation mode gate motor
6. A power supply system and production of the fulfilled gases
7. Systems of electric equipment of the engine
8. Manual box of gear shifting
9. Automatic transmission
10. Coupling and power shafts
11. Brake system
12. Suspension bracket and steering
13. Body
14. Onboard electric equipment

5.2.8. Removal and installation of the step engine of the gate of mixing of air and э / air circulation mode gate motor

PERFORMANCE ORDER

Remove a ware box and the right side panel of finishing of the central console.

Separate the socket, turn out 2 bolts and remove the step engine.

Turn out two bolts (2 on an illustration) and separate the socket (3) э / the motor.

Cut an electrical wiring coupler (4 on an illustration) and remove the socket from an arm (5).