13.1.3. Removal and installation of spoilers
Forward spoilers
|
- Forward spoilers are established on corners of a front bumper, from below.
|
- Turn out screws of fastening of a spoiler (2). For ensuring access to the internal screw of a spoiler turn out the lower screw in a loker and slightly delay a bumper.
|
- Pull a spoiler forward and remove it from spring holders.
- Installation is made upside-down.
|
|
Back top spoiler of the Sedan models
Back top spoiler of the Station wagon models
|
|
- Open a door of a back and remove from it the top cover (2).
|
- Remove two rubber stoppers (3) and a stoplight of the top level (4).
|
- Turn out bolts of fastening of a spoiler (5) and close a back door then give the central nut (6).
|
|
Access to the central nut can be got through area to the left of a stoplight. |
- Remove a spoiler.
- Installation is made upside-down.
|
|
Back lower spoiler
|
The back lower spoiler is established on the lower part of a bumper. |
|
|
- Poddomkratte the car also remove side porous blocks (2).
|
- Give two nuts (3) from each party and remove a spoiler from a bumper.
- Installation is made upside-down.
|
|