bcee4405

6.3.4. Removal and installation of a tube of the forced air

4-cylinder engines

 PERFORMANCE ORDER

  1. Remove the top cover of the engine and give fixture of a perepuskny tube (2 on an illustration) to the giving turbocompressor tube.
  1. Remove from a tube of the forced air perepuskny the valve (3 on an illustration) and separate the socket of the sensor of pressure/temperature located on it (4).
  1. Weaken fastening collars on the case of a throttle and a hose of the forced air (5 on an illustration). On models with RKPP disconnect Venturi's hose from a tube of the forced air.
  1. Turn out a bolt of fastening of a tube of the forced air to an arm on a head of cylinders (6 on an illustration) and pick up the phone. Close the case of a throttle and a hose of the forced air.
  2. If the phone is picked up for the purpose of replacement, rearrange from it the sensor of pressure/temperature upon a new tube, having greased sealing rings of the sensor with gasoline.
  3. Installation is made upside-down.

V6 engine

 PERFORMANCE ORDER

  1. Remove the top cover of the engine (1 on an illustration) and a perepuskny tube (2) with the valve, holding a sealing ring from connection with the giving turbocompressor tube.
  1. Separate the socket (3 on an illustration) the sensor of pressure/temperature and disconnect a tube of the forced air from the case of a throttle (4).
  1. Poddomkratte the car also disconnect a tube of the forced air from the intercooler, having left a collar on the intercooler (6 on an illustration).
  1. Lower the car on the earth and pick up the phone.
  2. Installation is made upside-down.