6.4.3. Removal and installation of the inlet pipeline


  1. Disconnect the giving tube from a turbocompressor and the MAF sensor then remove the top cover of the engine.
  1. Separate sockets, remove forward cable channel and shift an engine electrical wiring aside (3 on an illustration).
  1. Remove the top section of the inlet pipeline and an arm of a turbocompressor (4 on an illustration).
  1. Remove fuel tubes and the fuel distributive highway.
  1. Remove the EGR valve and a water hose. Disconnect and put aside EGR tube with a water shirt, and also a tube to a turbocompressor.
  1. Pick up the phone of ventilation of a case (7 on an illustration) and the lower section of the inlet pipeline (8) from both blocks of cylinders.
  1. Installation is made upside-down. Previously clear the interfaced surfaces and establish new laying. Besides, use new consolidations of the understanding connections, and also the new giving fuel tubes.