Saab:: 9-5: Replacement of the sensor of position of the accelerator pedal

6.4.4. Replacement of the sensor of position of the accelerator pedal

PERFORMANCE ORDER

Open a cover of the diagnostic socket (1 on an illustration) and turn out bolts of its fastening (2).
Turn out bolts and release a clamp of the lower panel (3 on an illustration).

Separate sockets of illumination of a threshold (4 on an illustration) and the sensor of position of the accelerator pedal (5 on an illustration).

Give nuts (6 on an illustration) and remove the sensor (7) of position of the accelerator pedal.
Installation is made upside-down.