bcee4405

4.4.10. Check of pressure of motive oil

 PERFORMANCE ORDER

  1. The car also establish to Poddomkratta it on props. Substitute under an oil filter capacity for collecting motive oil.
  1. Give a hollow bolt of fastening of a tube of a turbocompressor to an arm of an oil filter (2 on an illustration) and let's oil flow down.
  1. Establish under a hollow bolt a hose with the manometer and tighten a bolt. Arrange the manometer so that it was visible from a driver's seat.

You watch that the hose did not concern hot and sharp objects.

  1. Lower the car on the earth, start the engine and consider indications of the manometer. Compare the obtained data with requirements of Specifications.
  2. After measurement let's the engine work on single turns to reduce the turbocompressor speed then kill the engine.
  3. Installation is made upside-down. If necessary modify the level of motive oil.